Top MS HYDROMLIC FITTING,Pneumatic push fitting,PNEUMATIC VALVE Products in Navi Mumbai at best prices

BRASS HOSE ELBOW

A Brass Hose Elbow is a 90-degree (or sometimes 45-degree) angled brass fitting used to connect hoses or pipes, allowing a change in direction of fluid or air flow within a system. It is commonly used in plumbing, pneumatic, hydraulic, irrigation, and automotive applications where space is limited and straight connections are not practical.

BRASS PIPE FITTINGS

BRASS FERRULE ( SLEEVE )

A Brass Ferrule (Sleeve) is a small cylindrical mechanical component made from brass, used to reinforce, connect, secure, or terminate cables, pipes, rods, or tubes.

BRASS PIPE FITTINGS

BRASS OLIVE NUT

A brass olive nut (also called a compression nut) is a plumbing fitting component used in compression joints to secure and seal pipes or tubes without soldering.

BRASS PIPE FITTINGS

BRASS BULKHEAD UNION

A brass bulkhead union is a plumbing or fluid-transfer fitting designed to securely connect two pipes or tubes through a wall, panel, or tank surface while maintaining a leak-proof seal.

Compression Tube Fitting

BRASS BUSHING MALE & FEMALE

A male brass bushing is a threaded or press-fit component designed with external features (such as external threads or a protruding sleeve) that allow it to be inserted into or engage with a corresponding female part. It is used to support, align, or adapt shaft sizes while providing a smooth, low-friction bearing surface. Male brass bushings are corrosion-resistant, durable, and suitable for moderate load and speed applications. A female brass bushing is a hollow cylindrical component with an internal bore or internal threads designed to receive a male shaft or fitting. It acts as a wear-resistant liner, reducing friction between moving parts and protecting the housing from damage. Female brass bushings are commonly press-fit or threaded into housings and are valued for their strength, machinability, and corrosion resistance.

BRASS PIPE FITTINGS

BRASS MALE & FEMALE (M&F) ADAPTOR

A Brass Male & Female (M&F) Adaptor is a durable fitting designed to connect components with different thread genders. Manufactured from high-quality brass, it provides excellent resistance to corrosion, wear, and high temperatures, making it suitable for a wide range of applications.

BRASS PIPE FITTINGS

BRASS INSERT

A brass insert is a durable fitting designed to reinforce, adapt, or provide a secure threaded connection within another material such as plastic, rubber, or wood. It is commonly used to improve strength, wear resistance, and thread longevity in assemblies where softer materials are involved.

BRASS PIPE FITTINGS

BRASS REDUCING HEX NIPPLE

A brass male reducing hex nipple is a threaded pipe fitting designed to connect two female-threaded components of different sizes. It features male NPT threads on both ends, with one end larger than the other, allowing for a smooth reduction in pipe or fitting size. The hex-shaped center enables secure tightening with a standard wrench.

BRASS PIPE FITTINGS

BRASS MALE REDUCING ELBOW

A brass male reducing elbow is a durable plumbing and piping fitting designed to change flow direction while connecting different pipe sizes. It features a male threaded inlet (external threads) and a reduced outlet, allowing a larger pipe or port to connect to a smaller one at a 90° angle (or 45°, depending on design).

PNEUMATIC VALVE

OXYGEN CONCENTRATOR VALVE

The oxygen concentrators valve is designed to rapidly open and close air or oxygen flow paths in pressure swing adsorption (PSA) systems. It helps direct compressed air into sieve beds, vent exhaust gases, or route oxygen-rich gas to the outlet, depending on its position in the system.

PNEUMATIC REGULATOR

ELECTRO-PNEUMATIC REGULATOR

An E/P regulator takes an electrical input (such as 0–10 V, 4–20 mA, or digital signals) and uses it to precisely control air pressure at its output. The higher the electrical signal, the higher the regulated air pressure (within a set range)

DPS SERIES

DIGITAL PRESSURE SWITCH

A digital pressure switch is an electronic device used to monitor and control pressure in systems such as air, gas, water, or hydraulic lines. It detects pressure levels and automatically switches electrical circuits on or off when preset pressure limits are reached. Digital pressure switches are widely used in industrial automation, HVAC systems, compressors, pumps, pneumatic systems, and laboratory equipment to ensure safe and efficient pressure control.